Swathers and Tedders

Harvesting is more efficient with ELHO Twin swathers!

ELHO Twin swathers protect the forage from impurities and ensure that the forage stays clean and of optimal quality by moving the forage by lifting it.

Thanks to the lifting and throwing motion of the angled rotors, no rocks end up in the swath. This also reduces the risk of damage to the harvester following the swather. The rotor speed can be adjusted according to the forage type. This makes harvesting more efficient and reduces fuel consumption. ELHO Twin swathers are ideal for scattering and irregular sections as well. Forage producers and contractors have clearly seen the benefits of ELHO Twin swathers as their popularity keeps increasing from year to year!

Swathers and Tedders

V twin 950 super
Harvesting & feeding

V-Twin 950 Super

Drawbar

Forwards driving direction

Min 35 l/min

The new ELHO V-Twin 950 Super swather produces clean forage efficiently with a working width up to 9.5 metres! 

As harvesters become more powerful, they have the capacity to pick up swaths with more forage. ELHO has developed a new wider trailed swather: the V-Twin 950S with a hydraulically adjustable working width of 4.5–9.5 metres.

The new V-Twin 950S is equipped with HydroBalance suspension to ensure that the machine follows the ground surface smoothly. It also features double rotors that lift the forage and move it in the air it to the centre. This results in top-quality forage. The swath width can be optimised according to the harvester.

The standard V-Twin 950S model can also shift the swather to the right or left side of the tractor. This is useful especially if the space between the swaths is small and you want to avoid driving on the swaths. Another standard feature is the possibility to use only one of the rotors for swathing.

The V-Twin 950 S can be easily prepared for transport. The machine is narrow and relatively low compared to its working width.

Swathing with a harvester reduces the number of kilometres driven, increases the efficiency of harvesting and improves the quality of the forage. ELHO swathers offer forage producers and contractors numerous benefits!

Swathers

Swathing

  • Swath splitter

  • Hydraulic unit

  • Wheels 560/45-22,5

  • Hydraulic brake kit

Working width, m
4,5-9,5*
Swath width, m
1,3-2,2
Swath width adjustment, hydraulic
x
Swath width adjustment, mechanical
-
Side shift at the draw bar, m
1,8
Tine pattern
6
Rotor diameter, mm
860
Number of rake tines
476
Transport width, m
2,4-3,2**
Transport height, m
2,8
Transport length, m
7,8
Tyre size
500/50-17.5
Weight, kg
3650
Hydraulic coupling, single action
2
Hydraulic coupling, double action
1
Hydraulic connection-free return
1
Number of hydraulic motors
2
Required oil flow, l/min
35
Hydraulic pressure, min/max bar
175-210
3 point linkage
Cat.2
Front linkage
-
Front loader connection, euro
-
Electrical connection ISO/TR 12369
12V/10 Amp
  • 950 S
  • 950 S
  • 950 S
  • 950 S
  • 950 S
  • 950 S
  • 950 S
  • 950 S
karhoitin
Harvesting & feeding

V-Twin 750

Drawbar

Forwards driving direction

Min 25 l/min

The ELHO V-Twin 750 swather produces clean forage efficiently with a working width up to 8 metres!

The ELHO V-Twin 750 swather is equipped with HydroBalance suspension to ensure that the machine follows the ground surface smoothly and the forage stays clean. It also features double rotors that lift the forage and move it in the air it to the centre. The swath width can be optimised according to the harvester.

A flexible working width of 3–8 metres that can be adjusted from the cab while driving makes the V-Twin 750 ideal for scattering and irregular sections as well. The size of the forage harvester does not matter, as the rotors are designed to create a clean, regular and fluffy swath as wide as necessary that is easy to pick up. The multi-tined rotors also reduce the risk of clogging.

Swathing with a harvester reduces the number of kilometres driven, increases the efficiency of harvesting and improves the quality of the forage. ELHO swathers offer forage producers and contractors numerous benefits!

Swathers

  • Locking the rotors up VT 750

  • WHEELS 380/55-17

  • Swath splitter V-Twin 750

  • Hydraulic unit

Working width, m
3,0-8,0*
Swath width, m
1,3-1,8
Swath width adjustment, hydraulic
-
Swath width adjustment, mechanical
x
Side shift at the draw bar, m
-
Tine pattern
7
Rotor diameter, mm
655
Number of rake tines
336
Transport width, m
2,6
Transport height, m
1,8
Transport length, m
6,9
Tyre size
300/80-18.3
Weight, kg
2200
Hydraulic coupling, single action
2
Hydraulic coupling, double action
1 (2)
Hydraulic connection-free return
O
Number of hydraulic motors
2
Required oil flow, l/min
25
Hydraulic pressure, min/max bar
175-210
3 point linkage
Cat.2
Front linkage
-
Front loader connection, euro
-
Electrical connection ISO/TR 12369
-
  • V-Twin 750
  • V-Twin 750
  • V-Twin 750
  • V-Twin 750
  • V-Twin 750
  • V-Twin 750
  • V-Twin 750
  • V-Twin 750
  • V-Twin 750
  • V-Twin 750
v twin 600
Harvesting & feeding

V-Twin 600

3-point rear

Front

Forwards driving direction

Reverse driving direction

Min 25 l/min

The ELHO V-Twin 600 is a cost-effective swather!

The ELHO V-Twin 600 front-mounted swather enables you to utilise the full capacity of a rear-mounted harvester.

The V-Twin 600 swather is designed to swath all types of forage cleanly, gently and efficiently. The V-Twin 600 leaves the forage to dry until harvesting. Swathing and harvesting simultaneously saves time and fuel and reduces driving in the field. Harvesting is also more efficient when swaths have more forage. Recommended combinations include an ELHO V-Twin 600 at the front and a baler, baler-wrapper or self-loading trailer at the back of the tractor.

Increase efficiency and ensure top-quality forage!

Swathers

  • Drawbar kit V-Twin 600

  • Frontloader adapter (Euro II)

  • Roller kit

  • Third wheel kit

  • The V-Twin 600 is very flexible – it can be used at the front or back!

    • The V-Twin 600 does not require a power transmission shaft, so it can be mounted to a tractor with a front linkage but without front PTO.
    • The V-Twin 600 can be used in a variety of ways: attached to the front linkage, at the rear with a reverse-drive tractor, with the optional adapter attached to a front loader, or with the optional drawbar kit attached to the drawbar and “pulled”.

     

  • 1 / 1
Working width, m
6
Swath width, m
1,2-1,3
Swath width adjustment, hydraulic
-
Swath width adjustment, mechanical
x
Side shift at the draw bar, m
-
Tine pattern
6
Rotor diameter, mm
655
Number of rake tines
240
Transport width, m
2,4
Transport height, m
3,4
Transport length, m
2,1
Tyre size
18X8.5-8
Weight, kg
860
Hydraulic coupling, single action
2
Hydraulic coupling, double action
1
Hydraulic connection-free return
1
Number of hydraulic motors
2
Required oil flow, l/min
25
Hydraulic pressure, min/max bar
175-210
3 point linkage
Cat.2
Front linkage
Cat.2
Front loader connection, euro
O
Electrical connection ISO/TR 12369
-
  • V-Twin 600
  • V-Twin 600
  • V-Twin 600
  • V-Twin 600
  • V-Twin 600
  • V-Twin 600
twin4600
Harvesting & feeding

Twin 4600

Front

Forwards driving direction

Min 25 l/min

The ELHO Twin 4600 front-mounted swather with angled rotor provides increased productivity!

The ELHO Twin 4600 offers all the benefits of ELHO Twin models: it lifts and moves the forage or straw in the air so there is no need to ever drive over the forage.

Using a swather reduces the amount of driving on the field by half. Combining swaths before a harvester/baler enables the forage to be harvested faster, more efficiently and with lower fuel costs. The Twin 4600 is also ideal for turning and combining straw swaths. When using the Twin 4600 as a “regular” swather, two or three swaths can be combined effectively.

The fully hydraulic-driven Twin 4600 requires only 25 l/min of oil flow. The standard Twin 4600 can be mounted to a front linkage or a front loader (Euro II).

The ELHO Twin 4600 swather speeds up forage harvesting!

Swathers

Working width, m
4,1
Swath width adjustment, mechanical
X
Tine pattern
6
Rotor diameter, mm
655
Number of rake tines
138
Transport width, m
3
Transport height, m
1,6
Transport height, m
2,3
Tyre size
18X8,5-8
Weight, kg
540
Hydraulic coupling, single action
1
Hydraulic connection-free return
1
Number of hydraulic motors
1
Required oil flow, l/min
25
Hydraulic pressure, min/max bar
175-210
3 point linkage
Cat.2
Front linkage
Cat.2
Front loader connection, euro
X
  • Twin 4600
  • Twin 4600
  • Twin 4600
  • Twin 4600
  • Twin 4600
  • Twin 4600
TR 300
Harvesting & feeding

TR 300

3-point rear

Forwards driving direction

The ELHO TR 300 produces dry forage quickly!

The ELHO TR 300 tedder can be used to make, turn, spread and move swaths. The ELHO TR features a rotor with a large diameter and double tines that are secured with lock plates. In this way, should they break, they will not end up in the chopper rotor of the harvester. The TR tedder’s large diameter rotor results in a fluffy and clean swath that dries quickly. TR tedders are ideal for the swathing, turning, moving and spreading silage, dry hay and straw.

TR tedders can also be specified with an optional SideFlow conveyor that enables extremely precise and easy tedding and combining of swaths. The SideFlow conveyor features a self-centring mat with excellent throwing power.

More than 15,000 ELHO TR tedders have been delivered to satisfied customers, demonstrating how TR tedders have secured a firm place in the world of forage harvesting!

Swathers

Working width, m
2,8
Swath width adjustment, mechanical
X
Tine pattern
6
Rotor diameter, mm
1000
Number of rake tines
96
Transport width, m
3
Transport height, m
1,6
Transport length, m
2,2
Tyre size
18X8.5-8
Weight, kg
735
3 point linkage
Cat.2
  • TR 300
  • TR 300
  • TR 300
  • TR 300