Mower Conditioners

ELHO mower conditioners offer a wide range of benefits for mowing tasks!

ELHO mower conditioners combine innovations, durability, quick drying and driving comfort.

ELHO is a specialist manufacturer of forage harvesting and treatment equipment. ELHO offers a comprehensive selection of mower conditioners in a variety of different models and sizes. Almost all models feature the award-winning HydroBalance suspension and HydroActive impact protection. Special attention is paid to forage quality and quick drying. Quick drying results in higher quality forage and enables faster harvesting. We offer two types of mower conditioners: cutting units with a steel finger rotor and an adjustable counter bar, and cutting units with polyurethane rollers.

 

Mower Conditioners

NM 3200 F
Harvesting & feeding

NM 3200 F

Front

Forwards driving direction

Reverse driving direction

Min 60 kW

Finally, a front mower conditioner with all the benefits of a trailed mower conditioner!

The ELHO NM 3200 F front mower conditioner offers power, good handling, HydroBalance suspension and the Pendulum Centre System (PCS). The frame allows the cutter bar to follow the field surface freely and avoid obstacles – a mower conditioner cannot get any better than this!

The NM 3200 F is also available with the optional HydroBalance top link, which offers more movement in a more controlled manner, as well as other additional equipment. When working with trailed mowers and mower conditioners, ELHO front mower conditioners provide additional cutting power. For example, combining an NM 3200 F with an NM 9000 Delta allows even large fields to be covered efficiently.

 

Feature: Hydro active

Feature: Hydro balance

Mowers

Type: Finger conditioner

  • Side lights kit

  • Hydraulic kit for sideguards

  • Hydrobalance top link Cat 2/3

  • PTO shaft with share bolt

  • Flat knife kit L + R 3,2/3,3 m

  • Front bar

  • ELHO NM 3200 F:

    • Pendulum Centre System (PCS) for the mowing unit, which allows it to move more freely
    • Cutting unit is pulled from a point right above the front edge of the cutter bar
    • In case of a collision, the cutting unit moves back and up (reducing the force of the impact by 50%)
    • HydroBalance suspension
    • Flexible suspension between the cutting unit and the load-bearing frame
  • 1 / 1
Tractor power requirment, min/max, kW*
60-90
Minimum recommended tractor weight, kg*
5000
Working width, m
3,2
Number of discs
8
Adjustable skid shoes
X
Round forged steel finger
X
Rotor width, mm
2500
Rotor speed, RPM
920
Swath width, m
1,2-1,8
HydroBalance suspension
X
HydroActive release
X
Transport width, m
3
Weight, kg
1300
PTO speed, 1000 RPM
X
PTO speed, 750 RPM
O
Hydraulic coupling, single action
1
Hydraulic pressure, min/max bar
140-210
PTO connection 1 3/8"-Z6
X
3 point linkage
Cat.2/3
  • 3200 F
  • 3200 F
  • 3200 F
  • 3200 F
  • 3200 F
  • 3200 F
NM 3700 F
Harvesting & feeding

NM 3700 F

Front

Forwards driving direction

Reverse driving direction

Min 70 kW

World’s widest front mower conditioner

The ELHO NM 3700 F is the world’s widest single-beam front mower conditioner. With a cutting width of 3.7 metres, this model is extremely productive. The conditioner is also very effective at high speeds and in thick growth.

The Pendulum Center System (PCS) enables the mower conditioner to move freely, while HydroBalance enables it to lightly follow the field surface. This helps prevent contaminants from being lifted into the forage and also reduces fuel consumption.

The NM 3700 F front mower conditioner together with an NM 10500 butterfly mower conditioner is an extremely productive combination. Smart automation and GPS assistance also make it easy to use.

 

Feature: Hydro active

Feature: Hydro balance

Mowers

Type: Finger conditioner

  • Side lights kit

  • Hydraulic kit for sideguards

  • Hydrobalance top link Cat 2/3

  • PTO shaft with share bolt

  • Front bar

  • Flat knife kit L+R (3,7 m)

  • Adapter kit for large tyres

  • ELHO NM 3200 F:

    • Pendulum Centre System (PCS) for the mowing unit, which allows it to move more freely
    • Cutting unit is pulled from a point right above the front edge of the cutter bar
    • In case of a collision, the cutting unit moves back and up (reducing the force of the impact by 50%)
    • HydroBalance suspension
    • Flexible suspension between the cutting unit and the load-bearing frame
  • 1 / 1
Tractor power requirment, min/max, kW*
70-100
Minimum recommended tractor weight, kg*
6000
Working width, m
3,7
Number of discs
9
Adjustable skid shoes
X
Round forged steel finger
X
Rotor width, mm
2500
Rotor speed, RPM
920
Swath width, m
1,2-1,8
HydroBalance suspension
X
HydroActive release
X
Transport width, m
3,5
Weight, kg
1250
PTO speed, 1000 RPM
X
PTO speed, 750 RPM
O
Hydraulic coupling, single action
1
Hydraulic pressure, min/max bar
150-210
PTO connection 1 3/8"-Z6
X
3 point linkage
Cat.2/3N
  • 3700 F
  • 3700 F
NM 2800
Harvesting & feeding

NM 2800 VC

3-point rear, side

Forwards driving direction

Min 60 kW

Impressive flow and high driving speeds, even with smaller tractors!

The ELHO 2800 VC (vertical centre) mower conditioner us known for its impressive flow, high driving speeds and clean forage. The adjustable skid shoes and HydroBalance suspension enable the cutter bar to follow the field surface precisely without hitting the ground. The freely swinging and rounded fingers of the conditioning rotor rub the surface of the forage plant, while the adjustable counter bar and long conditioning chamber provide excellent drying. Side mower conditioners are ideal for use also with smaller tractors on the farm.

Side mower conditioners enable forage to be harvested with precision. For example, when working with butterfly units, unmown areas can be left between the mower conditioner and the front machine when making sharp turns. Using a combination of a front mower conditioner and a side mower conditioner, it is possible to turn as sharply as possible without leaving any unmown areas. 

 

Feature: Hydro balance

Feature: Mechanical release

Mowers

Type: Finger conditioner

  • Front bar

  • Flat knife kit L+R (2,8 m)

  • ELHO NM 2800 VC:

    •  
    •  
    • Easy to use
    • Own lift cylinder enables fast turns on the headland
    • HydroBalance suspension
    • Cutting unit suspended from the centre
    • Centre of gravity over the tractor’s centreline in transport mode
  • 1 / 1
Tractor power requirment, min/max, kW*
60-90
Minimum recommended tractor weight, kg*
4000
Working width, m
2,8
Number of discs
7
Adjustable skid shoes
X
Round forged steel finger
X
Rotor width, mm
2150
Rotor speed, RPM
920
Swath width, m
0,9-1,8
HydroBalance suspension
X
Mechanical release, automatic return
X
Transport width, m
2,5
Weight, kg
1050
PTO speed, 1000 RPM
X
PTO speed, 540 RPM
O
Hydraulic coupling, double action
1
Hydraulic pressure, min/max bar
120-210
PTO connection 1 3/8"-Z6
X
3 point linkage
Cat. 2
NM 3200 VC
Harvesting & feeding

NM 3200 VC

3-point rear, side

Forwards driving direction

Min 70 kW

A large side mower conditioner with all the features!

The ELHO NM 3200 VC (vertical centre) side mower conditioners has all the important ELHO features built in! The centre-suspended cutting unit smoothly follows the surface of the field, and the proven and durable cutter bar ensures a clean cut. The conditioning rotor with freely swinging fingers, adjustable counter bar and long conditioning chamber ensure optimal drying. HydroBalance suspension in turn ensures clean forage.

The ELHO NM 3200 VC enables quick turns on the headland: the tractor lift arms stay in their position while the cutting unit is lifted using its own lift cylinder. All ELHO’s mower conditioners and mowers feature the same smooth-cutting, safe and durable cutter.

Feature: Hydro balance

Feature: Mechanical release

Mowers

Type: Finger conditioner

  • Hydraulic kit for sideguards

  • Flat knife kit L+R (3,2/3,3 m)

  • Front bar

  • ELHO NM 3200 VC:

    • Efficient mowing with medium-size tractors
    • Own lift cylinder enables fast turns on the headland
    • HydroBalance suspension
  • 1 / 1
Tractor power requirment, min/max, kW*
70-100
Minimum recommended tractor weight, kg*
4500
Working width, m
3,2
Number of discs
8
Adjustable skid shoes
X
Round forged steel finger
X
Rotor speed, RPM
920
Swath width, m
1,3-2,1
Merged swath width, m
-
Spreading
-
Auger conveyor
-
HydroBalance suspension
X
Mechanical release, automatic return
X
Transport width, m
2,5
Height in transport mode, m
3,5
Weight, kg
1150
PTO speed, 1000 RPM
X
Hydraulic coupling, double action
1
Hydraulic pressure, min/max bar
120-210
PTO connection 1 3/8"-Z6
X
3 point linkage
Cat.2/3N
  • NM 3200 VC
  • NM 3200 VC
  • NM 3200 VC
  • NM 3200 VC
  • NM 3200 VC
  • NM 3200 VC
  • NM 3200 VC
  • NM 3200 VC
  • NM 3200 VC
  • NM 3200 VC
NM 3200 SF
Harvesting & feeding

NM 3200 SF

3-point rear, side

Forwards driving direction

Min 120 kW

A side mower conditioner with SideFlow auger conveyor and impressive features!

The versatile ELHO NM 3200 SF (SideFlow) side mower conditioner meets a wide range of needs. Standard features include a light kit, counterweight and SideFlow auger conveyor that is both light and reliable. SideFlow also enables scattering when the rear hatch of the screw conveyor is opened.

The NM 3200 SF enables a wide range of mowing techniques. By driving up and down the field, swaths are formed in pairs. By driving around a field, swaths will form at regular intervals. To group the swaths, a combination can be used to group the hay cut by four cutter bars into one swath, in which case a six-metre swather can be used to gather forage from a width of 12 metres. When using a combination of front and side mower conditioners, it is advisable to drive the edges of the field counterclockwise, because then the combination will not leave any uncut areas, even in tight curves.

The NM 3200 SF side mower conditioner is ideal for use together with a front mower conditioner.

 

 

Feature: Hydro active

Feature: Hydro balance

Finishing: Sideflow

Mowers

Type: Finger conditioner

  • Hydraulic kit for sideguards

  • Mountain driving kit

  • Flat knife kit L+R (3,2/3,3 m)

  • ELHO NM 3200 SF

    • Efficient mowing even with medium-size tractors
    • Own lift cylinder enables fast turns on the headland
    • HydroBalance suspension and HydroActive hydraulic release
    • Cutting unit suspended from the centre
    • SideFlow auger conveyor creates fluffy and even swaths
  • 1 / 1
Tractor power requirment, min/max, kW*
120-160 ***
Minimum recommended tractor weight, kg*
6500 *
Minimum recommended front mower, m
3,2
Working width, m
3,2
Number of discs
8
Adjustable skid shoes
X
Round forged steel finger
X
Rotor width, mm
2500
Rotor speed, RPM
920
Swath width, m
2,5 **
Merged swath width, m
1,4-2,3
Spreading
X
Auger conveyor
X
HydroBalance suspension
X
HydroActive release
X
Transport width, m
2,5
Weight, kg
2560 ****
PTO speed, 1000 RPM
X
Hydraulic coupling, single action
1
Hydraulic pressure, min/max bar
160-210
PTO connection 1 3/8"-Z6
X
3 point linkage
Cat.2/3
NM 3200 C
Harvesting & feeding

3200 C

Drawbar

Forwards driving direction

Min 60 kW

Tried-and-tested solutions and unsurpassed ease of use!

The ELHO NM 3200 C (Centre) trailed mower conditioner has adjustable auxiliary skid shoes and can be raised high on the headland. The end-cushioned boom cylinder is attached to the centre of the cutting unit, enabling mowing on both sides of the tractor.

The standard HydroBalance suspension developed by ELHO lightens the cutter bar so that it does not scrape along the ground or cause unnecessary friction. Hydraulic adjustable cutting height is available as an option, allowing the cutting height to be adjusted even while driving. The bevel gear on NM3200 Central models can be turned by the operator. In this way, the mower conditioner can also be used on a tractor with just a 540 rpm PTO instead of a 1000 rpm PTO.

 

 

Feature: Hydro balance

Feature: Mechanical balance

Mowers

Type: Finger conditioner

  • Hydraulic kit for sideguards

  • Hydraulic adjustable cutting height

  • Wheel weight

  • Flat knife kit L+R (3,2/3,3 m)

  • ELHO NM 3200:

    • Cutting unit can be lifted high on headlands to prevent swath disturbance
    • Wide load-bearing tyres (380 mm)
    • End cushioning of the boom cylinder
    • Adjustable auxiliary skid shoes
    • Easy to service
  • 1 / 1
Tractor power requirment, min/max, kW*
60-90
Working width, m
3,2
Number of discs
8
Adjustable skid shoes
X
Round forged steel finger
X
Rotor width, mm
2500
Rotor speed, RPM
900/1100
Swath width, m
1,3-2,5
Spreading
X
HydroBalance suspension
X
Spring suspension
X
Transport width, m
3,1
Tyre size
380/55-17
Weight, kg
2100
PTO speed, 1000 RPM
X
PTO speed, 750 RPM
O
PTO speed, 540 RPM
X
Hydraulic coupling, single action
1+1
Hydraulic coupling, double action
1
Hydraulic pressure, min/max bar
160-210
PTO connection 1 3/8"-Z6
X
3 point linkage
Cat.2
  • 3200 C
  • 3200 C
  • 3200 C
  • 3200 C
  • 3200 C
  • 3200 C
  • 3200 C
  • 3200 C
NM 3700 C
Harvesting & feeding

3700 C

Drawbar

Forwards driving direction

Min 70 kW

Ease of use, agility and power even with a medium-size tractor!

The ELHO NM 3700 C (Centre) trailed mower conditioner is easy and comfortable to use, even with a medium-size tractor. The NM 3700 C produces clean forage regardless of the plant or conditions.

The standard HydroBalance suspension developed by ELHO lightens the cutter bar so that it does not scrape along the ground or cause unnecessary friction. The cutting height can be adjusted hydraulically while driving using the optional hydraulic stubble adjustment. The 3700 C is available with optional 480 mm wide tyres for soft ground.

 

 

Feature: Hydro balance

Feature: Mechanical balance

Mowers

Type: Finger conditioner

  • Hydraulic kit for sideguards

  • Hydraulic adjustable cutting height

  • Wheel weight

  • Large tyres (480/45-17) factory-fitted

  • 750 rpm factory-fitted

  • Flat knife kit L+R (3,7 m)

  • ELHO NM 3700 C:

    • Cutting unit can be lifted high on headlands to prevent swath disturbance
    • Wide load-bearing tyres (380 mm)
    • End cushioning of the boom cylinder
    • Adjustable auxiliary skid shoes standard
  • 1 / 1
Tractor power requirment, min/max, kW*
70-100
Working width, m
3,7
Number of discs
9
Adjustable skid shoes
X
Round forged steel finger
X
Rotor width, mm
2500
Rotor speed, RPM
900/1100
Swath width, m
1,3-2,5
Spreading
X
HydroBalance suspension
X
Spring suspension
X
Transport width, m
3,5
Tyre size
380/55-17
Optional tyre size
480/55-17
Weight, kg
2300
PTO speed, 1000 RPM
X
PTO speed, 750 RPM
O
Hydraulic coupling, single action
1+1
Hydraulic coupling, double action
1
Hydraulic pressure, min/max bar
160-210
PTO connection 1 3/8"-Z6
X
3 point linkage
Cat.2
  • 3700 C
  • 3700 C
  • 3700 C
  • 3700 C
duett 7300
Harvesting & feeding

DUETT 7300

3-point rear, double

Reverse driving direction

Min 140 kW

Unsurpassed ergonomics for owners of a reverse-drive tractor!

The ELHO Duett 7300 is the ideal mower conditioner for large fields and is designed for use with reverse-drive tractors only. Operating in reverse provides an unobstructed view to the mower conditioner and agile steering thanks to the swivelling rear wheels.

The 7.3-metre Duett is also extremely efficient. If there are obstacles in the field or the individual fields are small, the Duett is often more efficient than a butterfly mower conditioner with a wider cutting width. The cutting unit comprises two 3.7-metre cutter bars that automatically engage when the units are lowered.

The Duett does not leave unmown areas even in tight bends. The cutting units feature HydroBalance suspension that lightly follows the field surface, forming high, quick-drying swaths on both sides of the tractor. The swaths are also very suitable for round balers. HydroBalance allows the driving speed to be kept high while still producing clean forage. The transfer from transport mode to the working position and vice versa is quick, as simply raising or lowering the wings is sufficient.

Feature: Hydro balance

Feature: Mechanical release

Mowers

Type: Finger conditioner

  • Flat knife kit L+R (7,3/10,5 m)

  • ELHO Duett 7300:

    •  
    • Ergonomic working position and unobstructed view to the machine
    • High capacity
    • Extremely agile and prevents tractor from driving over the forage
    • Forms twin swaths that are ideal for round balers
  • 1 / 1
Tractor power requirment, min/max, kW*
140-180
Working width, m
7,3
Number of discs
18
Adjustable skid shoes
X
Round forged steel finger
X
Rotor width, mm
2x2150
Rotor speed, RPM
920
Swath width, m
2x1,3-1,7
HydroBalance suspension
X
Mechanical release, automatic return
X
Transport width, m
2,8
Height in transport mode, m
4
Weight, kg
2700
PTO speed, 1000 RPM
X
Hydraulic coupling, single action
3
Hydraulic coupling, double action
1
Hydraulic pressure, min/max bar
180-210
PTO connection 1 3/4"-Z20
X
3 point linkage
Cat.3
  • Duett 7300
  • Duett 7300
  • Duett 7300
  • Duett 7300
  • Duett 7300
  • Duett 7300
NM 9000
Harvesting & feeding

NM 9000

3-point rear, double

Forwards driving direction

Min 150 kW

The ELHO NM 9000 butterfly mower conditioner is powerful and reliable!

The ELHO NM 9000 butterfly mower conditioner does not require a large tractor – a medium size tractor is sufficient. The NM 9000 is the ideal mower conditioner for contractors and large farms. This powerful machine offers optimal weight distribution, excellent usability, HydroBalance suspension and HydroActive impact protection.

The steel finger conditioner and adjustable counter bar facilitate quick drying. The machine is operated with the tractor’s own control system.

 

 

Feature: Hydro active

Feature: Hydro balance

Mowers

Type: Finger conditioner

  • Hydraulic kit for sideguards

  • Mountain driving kit

  • HydroBalance suspension with electronic adjustment

  • Flat knife kit L+R (9 m)

  • ELHO NM 9000: 

    • Low weight and balanced weight distribution
    • Low power requirement compared to width, can be used with medium size tractor
    • High capacity
    • HydroBalance suspension and HydroActive impact protection
    • Quick transfer between transport mode and work position
  • 1 / 1
Tractor power requirment, min/max, kW*
150-180
Minimum recommended front mower, m
3,2
Working width, m
9
Number of discs
16
Adjustable skid shoes
X
Round forged steel finger
X
Rotor width, mm
2x2500
Rotor speed, RPM
920
Swath width, m
2x1,3-2,1 **
HydroBalance suspension
X
HydroActive release
X
Transport width, m
3
Height in transport mode, m
3,7
Weight, kg
2500
PTO speed, 1000 RPM
X
Hydraulic coupling, single action
2
Hydraulic pressure, min/max bar
140-210
PTO connection 1 3/4"-Z20
X
3 point linkage
Cat.2/3

NM 3200 F

NM 3200 F

NM 3700 F

NM 3700 F
  • NM 9000
  • NM 9000
  • NM 9000
  • NM 9000
  • NM 9000
  • NM 9000
  • NM 9000
  • NM 9000
NM 9000
Harvesting & feeding

NM 9000 SF

3-point rear, double

Forwards driving direction

Min 160 kW

A butterfly mower conditioner that does not require a large tractor!

The ELHO NM 9000 SF (SideFlow) butterfly mower conditioner is ideal for contractors and large farms. This powerful machine offers optimal weight distribution, excellent usability, HydroBalance suspension and HydroActive impact protection. The steel finger conditioner and adjustable counter bar facilitate quick drying.

The NM 9000 is available with or without the SideFlow swath combiner. Automatic overload protection opens the rear hatch if a large object enters the machine or if a blockage is forming. In transport mode, the centre of gravity is over the tractor’s centreline, so even smaller tractor remain stable.

 

 

Feature: Hydro active

Feature: Hydro balance

Finishing: Sideflow

Mowers

Type: Finger conditioner

  • Hydraulic kit for sideguards

  • Mountain driving kit

  • HydroBalance suspension with electronic adjustment

  • Flat knife kit L+R (9 m)

  • ELHO NM 9000 SF: 

    • Low weight and even weight distribution
    • Low power requirement compared to width, high capacity
    • HydroBalance suspension and HydroActive impact protection
    • Quick transfer between transport mode and work position
    • SideFlow auger conveyor produces clean and fluffy swaths
  • 1 / 1
Tractor power requirment, min/max, kW*
160-200
Minimum recommended front mower, m
3,2
Working width, m
9
Number of discs
16
Adjustable skid shoes
X
Round forged steel finger
X
Rotor width, mm
2x2500
Rotor speed, RPM
920
Swath width, m
2x2,5 **
Merged swath width, m
1,4-2,3
Spreading
X
Auger conveyor
X
HydroBalance suspension
X
HydroActive release
X
Transport width, m
3
Height in transport mode, m
3,7
Weight, kg
3150
PTO speed, 1000 RPM
X
Hydraulic coupling, single action
2
Hydraulic pressure, min/max bar
160-210
PTO connection 1 3/4"-Z20
X
3 point linkage
Cat.2/3

NM 3200 F

NM 3200 F

NM 3700 F

NM 3700 F
  • NM 9000 SF
  • NM 9000 SF
  • NM 9000 SF
  • NM 9000 SF
  • NM 9000 SF
  • NM 9000 SF
  • NM 9000 SF
  • NM 9000 SF
NM 10500 SF
Harvesting & feeding

NM 10500 SF

3-point rear, double

Forwards driving direction

Min 190 kW

Widest butterfly mower conditioner on the market and packed with advanced features!

The ELHO NM 10500 SF (SideFlow) butterfly mower conditioner features an adjustable working width from 9.4 to 10.5 metres, enabling it to be used together with front mounted mower conditioners of different sizes. Each side can be adjusted individually either manually or automatically. AutoBalance suspension maintains the optimal position at all times, also in curves.

Automatic Curve Compensation (ACC) uses the machine’s own GPS system to adjust the overlap of the cutter bars in curves to prevent any unmown areas between the front and rear units. The same GPS system is used for the Headland Automatics (HA), which raises the rear mower conditioners automatically at the exact same spot where the front units were raised. In this way, the operator can focus on the front unit alone. The HydroActive hydraulic release device provides impact protection in case of obstacles.

The SideFlow auger conveyor is ideal for harvesting forage plants with stalks. For the ultimate cutting power and highest possible comfort levels, the NM 10500 is the right choice!

Feature: Hydro active

Feature: Hydro balance

Finishing: Sideflow

Mowers

Simultaneous use

This attachment can be used simultenously with another

Type: Finger conditioner

  • Flat knife kit L+R (7,3/10,5 m)

  • ELHO NM 10500:

    • Extremely wide 10.5-metre cutting width with a 1.1-metre adjustment range
    • AutoBalance automatic suspension system
    • HydroActive impact protection
    • Automatic Curve Compensation (ACC) using GPS
    • Headland Automatics (HA) using GPS
    • Temperature sensors in bevel gears detect faults
    • Centre of gravity close to the tractor provides stable transport
    • SideFlow auger conveyor produces clean and fluffy swaths
  • 1 / 1
Tractor power requirment, min/max, kW*
190-290 ***)
Minimum recommended front mower, m
3,2
Working width, m
9,4-10,5
Number of discs
18
Adjustable skid shoes
X
Round forged steel finger
X
Rotor width, mm
2x2150
Rotor speed, RPM
900/1100
Swath width, m
2x2,2 **)
Merged swath width, m
1,6-2,5
Auger conveyor
X
HydroBalance suspension
X
HydroActive release
X
Transport width, m
3
Height in transport mode, m
4
Weight, kg
4080
PTO speed, 1000 RPM
X
P,T,LS
Hydraulic pressure, min/max bar
180-210
PTO connection 1 3/4"-Z20
X
3 point linkage
Cat.3

NM 3700 F

NM 3700 F
  • NM 10500 SF
  • NM 10500 SF
  • NM 10500 SF
  • NM 10500 SF
  • NM 10500 SF
  • NM 10500 SF